WorldHeader  
  Homepagebutton ContactUs

or call 603 671 7016

 

   
 


Detailed Epoxy Info
We sell only the very best epoxy- AdTech Epoxy!
After reviewing & testing all leading epoxies, we found Adtech 820 epoxy to be the best. This is why we are proud to sell this outstanding product!
We will continue to sell West System Epoxy (see below or click HERE)


Summary:
- UV stable (all hardeners)
- Room temp & high temp cure (handles temp over 180F w/no post cure)
- Post curing compatible
- Very high tensile (breaking strength)
- Low Viscosity (thinner epoxy)
- Available in Qt, Gal, 5Gal, & 55Gal drums
- Very low to no odor

- a professional epoxy that works exceptionally well for pros and hobbiests alike

The AdTech 820 Epoxy Laminating Systems are developed for the fabrication and repair of high performance composite structures. They consist of one resin and a selection of three separate hardeners to suit your building or repair needs. The resin and hardener combinations produce low viscosity mixtures with convenient volumetric mix ratios. In addition, the 820 Epoxy Laminating Systems are specially formulated for standard wet lay-up or resin-infusion operations requiring the highest degree of fabric wetting and air release attributes. The systems are specifically engineered to promote a high fiber-to-resin ratio and a greater interface with composite fabric(s), thereby resulting in lighter, stronger parts offering lower maintenance and long-term performance.

820 Epoxy Laminating Systems are UV stabilized, ultra low viscosity laminating system that is ideal for use in vacuum infusion processes or RTM applications. Use with Graphite, S-Glass, E-Glass or Kevlar fabrics. Produces strong, light weight composite parts. They are specially formulated for standard wet lay-up or resin-infusion operations requiring the highest degree of fabric wetting and air release attributes.

We recommend curing Adtech & our Nanotube Enhanced Resin between 85F and 160F. We have not tested above 200F and temp below 80F are not recommended due to very long cure times. Adetech and our nano resin will get thick when they get cold. If stored below 60F it may become semi-solid (this does not hurt the resin); if this occurs, put the can in front of a space heater and the resin will become thin and clear again. If you need a resin to cure below 77F, we recommend you consider West Systems below.

AdTech 820 Hardeners Pot Life at 77F  Complete Cure UV Stable Dry to Touch 77F Time Before Sanding Mixing Ratio
Resin to Hardener
(by volume)
Resin to Hardener
(by weight)
822 25-30min 7 Days Yes ~4-6hrs* 24hrs 5 to 1 100 to 18
823 40-45min 7 Days Yes ~6-8hrs* 24hrs 5 to 1 100 to 18
824 50-60min 7 Days Yes ~12hrs* 24hrs 5 to 1 100 to 18
Click here for MSDS info  

*****Please note - if you order the pumps, they are a 1 to 1 Ratio*****
We generally recommend you confirm the correct ratio with a scale, even if you use the pumps.

 
Product Max temp/HDT Required post cure for highest temp Post-Curable?* UV Stable

Viscosity (cps)

AdTech 820 180F+ No Yes Yes 350-650
AdTech 336 375F Yes Yes No 2000-3000
Water  1cps
Honey 2000cps to 10000cps depending on temp

 

Carbon Nanotube Enhanced Epoxy Resin and

Available in combined or separate kits

World's Strongest Epoxy Resin
Our Carbon Nanotube Kits produce typical increase stiffness and breaking strength of 25%+

Carbon Nanotubes are 40X stronger than carbon fiber. You will very likely increase stiffness and breaking strength by well over 25% just by using this Nanotube resin!

Our carbon Nanotubes are added to the resin.

Customer comments: "results were fantastic"...."really bullet proof!"

 

The "kits" above come with Nanotube Resin and Hardener.

 

 

 Nitrile Gloves Size

Epoxy Nanotube Resin

Resin now come in convenient screw-top cans ...

UV Stable,

Very LOW VOC,

Nanotubes withstands temp beyond 200F+

Room Temp (80F+) or Post Cure,

Nanotubes Resin + Hardener, will not affect the clear appearance of your carbon fabric in standard thin coats (not intended for thick top coats)

 

Works great for vacuum bagged & hand lay-up applications (Nanotubes are not intended for infusion)

 

- Resin is consistence of a light syrup, a bit thicker than standard Adtech or West System Resin

- hardener is thin like water

- Not intended for use with pumps

- 5 parts resin to 1 part hardener (same as below).

- Results may vary, but it is likely you will get "better" results (tests were done using multiple layers of intermediate modulus carbon fiber; even better result should be achievable with aerospace grade carbon, commercial grade carbon, Kevlar, Fiberglass, Basalt, Innegra or other composite fabrics).

We recommend mixing resin before each use (the nano tubes will settle a bit over time).

 

Questions? Contact us! We make one of the world's lightest sporting goods with this resin.

 

 

AdTech Small Repair Kit 4oz Kits

 

 

 Nitrile Gloves Size

 

4oz Resin + 0.2oz Hardener 

UV Stable, 180F, Room Temp or Post Cure, Clear

Resin & Hardener Pumps

AdTech 820 Pint Kits

 

 

 Nitrile Gloves Size

 

Pint Epoxy + 0.2Pt Pint Hardener 

UV Stable, 180F, Room Temp or Post Cure, Clear

Resin & Hardener Pumps

 

 

 

 Nitrile Gloves Size

 

AdTech 820 Quart Kits

Quart Epoxy + 0.2Qt Hardener 

UV Stable, 180F, Room Temp or Post Cure, Clear

Resin & Hardener Pumps

 
 
 
                   

AdTech 820 Gallon Kits

 

 

 Nitrile Gloves Size

 

Gal Epoxy + 0.2Gal Hardener 

UV Stable, 180F, Room Temp or Post Cure, Clear

Resin & Hardener Pumps

   
                   

AdTech 820 5 Gallon Kits

 

 

 Nitrile Gloves Size

 

5 Gal Epoxy + 1 Gal Hardener 

UV Stable, 180F, Room Temp or Post Cure, Clear

Hardener Pump only

 
                   

AdTech 820 55 Gal Drum Kits - Please call for pricing!

 

 

AdTech 336 High Temp Resin (375F)

 

 

 Nitrile Gloves Size

 

Quart Epoxy + Pint Hardener 

Clear

 
Pump Kit Set   Qty: $12.99
     
       
       
       
       
******************Below are West Systems Epoxy products**************
West System is a general purpose laminating epoxy that works well for composite laminating. West system's hardeners are thicker than Adtech's above, and are
sometimes adventagous when trying to build-up layers or top coats. West System's 207 hardener is UV stable.
Product Max temp (HDT) UV Stable Viscosity (cps) 
West System 116F-142F 207 only 650-975
   
     
West Systems Quart Kits    

Epoxy + Hardener + Pump Kit

Note: 207 Hardener is UV Stable

Room Temp Cure

 

   
     

West Systems Gallon Kits

Epoxy + Hardener + Pump Kit

Note: 207 Hardener is UV Stable

Room Temp Cure

 

   
     
for West Systems 5 Gallon Kits & 55 Gallon Drums Please call Us: 1 603 671 7016
 
5 Minute Epoxy Kits
   
4oz Hardener & 4oz. Resin   Qty:
8fl oz. total
 
$17.79
       
16oz Hardener & 16oz. Resin Qty:
32fl oz. total
 
$39.49
       
 
Minipumps
   
Auto-measuring pumps - no need to measure quantities yourself!

(one squirt resin + one squirt hardener -perfect measuring every time!)

   
   

300 Mini Pump Set (for Group Size A, B or C) Set of 3 Pumps   Qty:
 
$13.99
 

Note 1/2 ounce resin will cover about 12" sq area.

Why use Epoxy vs. Vinylester vs. Polyester Resins Click Here

Resolving Common Epoxy Related Issues Click Here

All Epoxy is shipped via UPS and insured up to $100.00.  We can only ship these products within the USA and Canada.

 

 

         
Epoxy Fillers
  
Filler
Description

403

403 Microfibers are made of fine cotton fibers and is used as a thickening additive with resin/hardener to create a multi-purpose adhesive. Microfibers and epoxy are particularly effective in bonding wood. Epoxy thickened with microfibers provides good gap-filling qualities while retaining excellent wetting and penetration capabilities. Microfibers are used primarily in bonding and gap-filling applications. Microfibers are non-toxic, but care should be taken to avoid inhalation. Color: Off-White.

6oz. $9.99

20oz. $22.99

20lbs. $199.99

 
           
404

404 High-Density filler is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap-filling where maximum strength is necessary. May be added to the resin/hardener at a rate of 20 to 30% by weight, depending on the viscosity needed. Color: Off-White.

15.2oz. $13.99

43oz. $29.99

30lbs. $199.99

 
         
405

405 Filleting Blend is a strong, wood-toned filler for use in glue joints and fillets on naturally-finished wooden interiors. Mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Color is a consistent tan so it can be used to modify the shade of other West System fillers.

8oz. $15.99

     
         
406

406 Colloidal Silica is a thickening additive used to control the viscosity of epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Color: off-white.

1.7oz. $9.99

5.5oz. $22.99

10 lbs. $219.99

 
         
407

407 Low-Density filler is a blended Microballoon-based filler used primarily to make inexpensive filling and fairing putties which are easy to sand or carve while still being a reasonably good engineering material on a strength-to-weight basis. It can also be used as a thickening additive for bonding veneers and in low-stress structural applications where light weight can be beneficial. Good feathering and won't sag. Color: Reddish-Brown.

4oz. $12.99

12oz. $33.75

14 lbs. $335.00

 
         
410

410 The ideal low-density filler for creating a light, easily worked fairing compound especially suited for fairing large areas. 410 MICROLIGHT handles well and mixes with greater ease than 407 or Microballoons, and is approximately 30% easier to sand. It is also more economical for large fairing jobs but is not recommended under dark paint or other surfaces subjected to high temperatures. Cures to a light tan color. Do not mix 410 MICROLIGHT filler with polyester or vinylester resins. Microlight will inhibit the cure of polyester or vinylester resins.

2oz. $9.92

5oz. $22.15

4 lbs. $199.99

 
       

Please Use Epoxy Safely!  Make sure you have protective clothing, gloves, an appropriate respirator and use the product in a well ventilated area.  Please, read the safety info. in the links above and follow all manufacturer's suggestions!

Soller Composites assumes no responsibility for the use, misuse, and/or results of the either, of any materials, product, information, and/or suggestions. Customers are strongly encouraged to, and  should/must, research the proper safe use of all products and determine the proper use and suitability of each product for his or her individual application(s).  Soller Composites's sole
responsibility and/or liability is limited to the replacement of product or refund of the purchase price.  Please contact us if you have any questions.